CAME VER KIT Bedienungsanleitung PDF herunterladen (Seite 86)

Micon Car Kit, Ver. 5.1Body Assembly Manual (Version for RX62T)

Photo 10.53 Photo 10.54

As shown in the photo, attach to the sensor board the

long flat cable (480 mm) prepared for the sensor board.

Bind the cable to one of the sensor arms.

Knot the wire a second time and cut off the excess

portion, as shown in the photo.

Pass wire through hole

Photo 10.55 Photo 10.56

As shown in the photo, turn the front wheel assembly all

the way to the left and bind up the cable in the location

indicated by the arrow.

Pass a wire through the hole, as indicated by the arrow

in the photo, and tie it around the sensor board flat cable

to secure it.

Pass the sensor board flat cable through the opening

between the toggle switches.

Photo 10.57 Photo 10.58

Bind the servo cable in like manner, as shown in the

photo.

As shown in the photo, pass the servo motor cable as

well through the opening between the toggle switches.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 92

Keine Kommentare

CAME VER KIT Bedienungsanleitung Seite 86