CAME VER KIT Bedienungsanleitung PDF herunterladen (Seite 39)

Micon Car Kit, Ver. 5.1Body Assembly Manual (Version for RX62T)

As shown in photos 6.17 and 6.18, securely tighten the nut using a nut tightener. If you cannot tighten the nut

sufficiently, use a Phillips screwdriver on the opposite side to prevent the screw from turning when you rotate the

nut tightener.

Photo 6.13 Photo 6.14

Photo 6.15 Photo 6.16

Photo 6.17 Photo 6.18

As shown in photo 6.15, place a spring washer over

the end of the screw.

Inner side of wheel (deep indentation)

Place a hub on the inner side (deep indentation) of the

wheel (photo 6.13).

Insert a screw into a hole in the outer side (shallow

indentation) of the wheel (photo 6.14).

As shown in photo 6.16, screw on a nut.

Outer side of wheel

(shallow indentation)

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 91 92

Keine Kommentare

CAME VER KIT Bedienungsanleitung Seite 39