CAME VER KIT Bedienungsanleitung PDF herunterladen (Seite 23)

Micon Car Kit, Ver. 5.1Body Assembly Manual (Version for RX62T)

3.5.3. Finishing the Servo Front Reinforcing Plate

Photo 3.48

Servo front

reinforcing plate

Photo 3.49 (complete)

For this task you will need the servo front reinforcing

plate and servo support plate shown in photo 3.48.

Photo 3.50

(1)

(2)

Photo 3.51

(1) (2)

Rather than filing flat the entire side indicated by

dotted lines (2) in photo 3.49, file flat the portions on

each end up to the second indentation. File flat the

portions indicated by dotted lines in photo 3.51.

Photo 3.52

As shown in photo 3.52, secure the servo front

reinforcing plate to the servo support plate with black

screws and nuts. Edge (1) in photo 3.49 should line up

with edge (1) in photo 3.52.

Photo 3.53

Insert the spare reinforcing plates next to the black

screws and nuts to prevent them from coming into

contact with the vise. File down the protrusion. (See

photo 3.33 regarding the spare reinforcing plates.)

Spare reinforcing plate

Protrusion

(1)

Servo support

plate

File down protruding edges.

As shown in photo 3.50, clamp the plate in the vise

and file flat the edge indicated by dotted line (1).

File flat the edges indicated by the dotted lines in

hoto 3.49.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 91 92

Keine Kommentare

CAME VER KIT Bedienungsanleitung Seite 23