CAME VER KIT Bedienungsanleitung PDF herunterladen (Seite 20)

Micon Car Kit, Ver. 5.1Body Assembly Manual (Version for RX62T)

3.5.2. Finishing the Servo Support Plate

To prevent the black screws and nuts between the servo support plates and the clamps of the vise from coming into

contact with the vise, place the pieces shown in photo 3.33 (spare reinforcing plates) between the servo support

plate and the vise as shown in photo 3.34.

Photo 3.32

As shown in photo 3.32, use black screws and nuts to

fasten servo back reinforcing plates to the servo support

plate in four places.

Photo 3.33

Photo 3.34

Photo 3.35

File flat the edge of the portion secured by the vise as

shown in photo 3.35 (the portion indicated by the

dotted line).

Note: Exercise caution when performing this

step, because filing the portion other than

that indicated by the dotted line (the

portion not secured by the vise) could

cause the

late to crack.

Photo 3.36

Reclamp the work piece in the vise as shown in

photo 3.36, and file flat the bumps on the remaining

portion of the edge.

Spare reinforcing plate

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 91 92

Keine Kommentare

CAME VER KIT Bedienungsanleitung Seite 20