CAME VER KIT Bedienungsanleitung PDF herunterladen (Seite 61)

Micon Car Kit, Ver. 5.1Body Assembly Manual (Version for RX62T)

For right motor

For left motor

Photo 8.69 Photo 8.70

Repeat the above steps to attach pin connectors to the

power wires for the left motor. After attaching the

connectors, twist the red and black wires as shown in the

photo.

Use the wire stripper to remove about 2 mm of

insulation from the ends of the red and black electrical

wires opposite the connectors, and apply solder to the

exposed strands as shown in the photo.

Red

Black

Red

Black

Photo 8.71 Photo 8.72

For the left motor, feed the power wires (long wires)

through the portion indicated by the arrow in the photo.

Solder the tips of the power wires to the motor

terminals.

Note: Be careful not to reverse the red and black

wires when soldering them to the terminals.

For the right motor, solder the tips of the power wires

(short wires) to the motor terminals as shown in the

photo.

Note: Be careful not to reverse the red and black

wires when soldering them to the terminals.

Left motor

Right motor

Photo 8.73

When the task is complete, the gearboxes appear as shown in the photo.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 91 92

Keine Kommentare

CAME VER KIT Bedienungsanleitung Seite 61