CAME VER KIT Bedienungsanleitung PDF herunterladen (Seite 58)

Micon Car Kit, Ver. 5.1Body Assembly Manual (Version for RX62T)

8.3. Attaching the Motor Power Wires

Here, we use the crimp tool that made in Japan because attach the connector attached to the kit to electric cable. If

you haven't a crimp tool that made in Japan, please use a connector and crimp tool in accord with the standard of

each country.

Photo 8.53 Photo 8.54

Prepare the red and black electrical wire. For this task you will need three XH connectors and six

contact pins.

Photo 8.55 Photo 8.56

As shown in the photo, cut pieces of red and black

electrical wire to a length of 140 mm for the right side

and 190 mm for the left side.

Prepare a crimping pliers and wire stripper.

Crimping pliers

Wire stripper

Right side: Red and black electrical wire, 140 mm

Left side: Red and black electrical wire, 190 mm

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 91 92

Keine Kommentare

CAME VER KIT Bedienungsanleitung Seite 58